Garlon™ XRT

NEW Garlon XRT is the next generation of Garlon. Garlon XRT offers the same excellent performance you have come to trust with the Garlon brand, but in a new and improved formulation that is 1/3 higher concentrated for your convenience and ease of use.
Garlon XRT logo

Weeds

Weeds controlled

  • Alder
  • Ash
  • Aspen
  • Basswood
  • Beech
  • Birch
  • Blackberry
  • Buckthorn
  • Cherry*
  • Chokecherry*
  • Cottonwood
  • Elderberry
  • Elm*
  • Hawthorn
  • Hickory
  • Hop-hornbeam
  • Honey locust*
  • Locust
  • Maples
  • Mulberry
  • Oaks*
  • Poison oak
  • Pines*
  • Poplar
  • Red maple*
  • Raspberry*
  • Sassafras
  • Sumac
  • Sycamore
  • Tamarack
  • Wild rose
  • Willow
  • Witch hazel

*These species may require treatment at the higher rate and may need to be retreated the following year, particularly if the original treatment was made at the lower rate.

Rates

Garlon XRT is available in 2x10L cases and 110L drums.

Broadleaf weed control:
Mix 2.5 to 5 L of Garlon XRT Herbicide in a minimum of 200 L of water per hectare to ensure uniform coverage.

Ground equipment (broadcast) applications:
Mix 0.6 to 2.5 L of Garlon XRT Herbicide in a minimum of 200 L of water per hectare to ensure uniform coverage.

When to Apply

For foliar applications, apply to target trees and weeds when they are actively growing.

  • Trees: Apply after full leafout to actively growing trees, prior to autumn colouration.
  • Weeds: Apply to actively growing weeds, after emergence, prior to flowering.

Rainfast

2 hours

Grazing & Harvest

  • There is no restriction on livestock grazing treated areas for areas applied with up to 3L/ha.
  • 3 to 5 L/ha: do not graze or harvest green forage from treated area for 14 days following treatment. Note: No grazing restriction for beef livestock if less than 25% of the grazed area has been treated.

Application Guidelines

Single stem foliar
  • For control of woody plants up to 2.5 m in height, use Garlon XRT herbicide at rates of 2.5 to 5 L in enough water to make 1000 L of spray solution. Use the higher rate for late summer application when growth rates are reduced or when hard-tocontrol species are present. Spray brush to the point of runoff.
  • Coverage should be thorough to wet all foliage.
Low volume foliar. 
  • For control of woody plants up to 2.5 m in height use this technique with knapsack or backpack sprayers equipped with flat fan or solid cone nozzles. 
  • For control of woody plants, mix 0.6 to 3 L of Garlon XRT herbicide in enough water to make 100 L of spray solution. 
  • Direct the spray solution to thoroughly wet the foliage of the target plants but not to the point of runoff.
  • Apply after full leafout, but before autumn colouration.